标准光 ？
100G\200G Coherent Optical Module
Description
General
The 10 0G / 20 0G coherent optical module uses a 10 4 - pin CFP2 -MSA electrical connector for connecting the host card.Figure 1-1shows the picture of this module.The optical module consists of three functional parts: TX module, RX module and control module. All the control interface pins are provided by an internal microcontroller. This microcontroller can also be used for modulator control, software management, and alarm / performance event reporting.Figure 1-2shows the block diagram of the 100 G coherent optical module.Features
Features
● 100G coherent optical module operating up to 112.30 Gbps
● 200G coherent optical module operating up to 211.45 Gbps
● PM-QPSK (100G)and PM-16QAM (200G) modulation formats
● Electrical interfaces CAU-I4
● CFP MSA Management Interface Specification 2.2 with modifications compliant
● Near-end / remote-end data loopback
● Maximum power consumption: 21 W
Application
The 100G\200G coherent optical module is used on the host system for MAN DWDM applications.
Performance Specifications
1.100G Optical Port
100G Optical Port Performance Specifications
|
Parameter |
Value |
|
Network lane, modulation format |
PM-QPSK |
|
Optical channels |
96 |
|
Grid spacing |
50 GHz |
|
Frequency range |
191.3 to 196.05 THz |
|
Wavelength stability |
±1.5 GHz |
|
Tx output power, default |
-13 dBm |
|
Tx output power accuracy |
±1.5 dBm |
|
Output power during tuning |
< -35 dBm |
|
CD tolerance |
±40 000 ps/nm |
|
DGD tolerance |
33 ps |
|
Input power range |
0 to -18 dBm |
|
OSNR tolerance（ typical） |
12 dB (Rx optical power: -8 to -10 dBm) |
|
Power consumption |
Typical: 18 W Maximum: 20 W |
2.200G Optical Port
|
Parameter |
Value |
|
Network lane, modulation format |
PM-16QAM |
|
Optical channels |
96 |
|
Grid spacing |
50 GHz |
|
Frequency range |
191.3 to 196.05 THz |
|
Wavelength stability |
±1.5 GHz |
|
Tx output power, default |
0 dBm |
|
Maximum output optical power |
+5 dBm |
|
Min. Tx output power |
-10 dBm |
|
Tx output power accuracy |
±1.5 dBm |
|
Output power during tuning |
< -35 dBm |
|
CD tolerance |
±10 000 ps/nm |
|
DGD tolerance |
22 ps |
|
Input power range |
0 to -18 dBm |
|
OSNR tolerance（typical） |
19.5 dB (Rx optical power: -8 to -10 dBm) |
|
Power consumption |
Typical: 19 W Maximum:21 W |
Electrical Characteristics
1.Power Supply Requirements
The 100G / 200G CFP2 coherent optical module is powered by an independent 3.3 V power supply on the host. All voltages are tested at the connector interfaces.Table 4-2describes the power supply requirements.
Coherent CFP2 Optical Module Power Supply Specifications
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
3.3 V DC power supply voltage |
VCC |
3.2 |
3.3 |
3.4 |
V |
±5% |
|
3.3 V DC power supply current |
ICC |
- |
- |
7.3 |
A |
Note 1 & 2 |
|
Power supply noise |
Vrip |
- |
- |
2 |
%p-p |
DC - 1 MHz |
|
3 |
1 - 10 MHz |
|||||
|
Power consumption |
Pw_class 4 |
- |
18 |
20 |
W |
|
|
Operating temperature |
T |
0 |
- |
70 |
?C |
- |
Note: The Min. and Max. values apply to the full temperature range at the EOL of the module. Typical values (Typ.) are defined at the BOL of the module, with operating temperature at 25?C and expected power supplied.
Note 1: The maximum current of each pin cannot exceed 1.3 A.
Note 2: The Max. value of Icc is for design reference, and the expected working current cannot exceed Pw_normal/Vcc.
3.3 V LVCMOS Electrical Characteristics
The 3.3 V LVCMOS level of the hardware control and alarm signal pins described above shall meet the electrical characteristics described in shows the recommended input and output termination modes for these pins.
3.3 V LVCMOS Electrical Characteristics
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
|
Power supply voltage |
VCC |
3.2 |
3.3 |
3.4 |
V |
|
Input high voltage |
VIH |
2 |
- |
VCC+0.3 |
V |
|
Input low voltage |
VIL |
-0.3 |
- |
0.8 |
V |
|
Input leakage current |
IIN |
-10 |
- |
10 |
μA |
|
Output high voltage (IOH =-100 μA) |
VOH |
VCC-0.2 |
- |
- |
V |
|
Output low voltage (IOL =100 μA) |
VOL |
- |
- |
0.2 |
V |
1.2 V LVCMOS Electrical Characteristics
The electrical characteristics of the aforesaid MDIO pins operating in 1.2 V LVCMOS mode.Figure 4-7shows the recommended input and output termination modes of these pins .
1.2 V LVCMOS Electrical Characteristics
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
|
Input high voltage |
VIH |
0.84 |
- |
1.5 |
V |
|
Input low voltage |
VIL |
-0.3 |
- |
0.36 |
V |
|
Input leakage current |
IIN |
-100 |
- |
100 |
μA |
|
Output high voltage (IOH= -100 μA) |
VOH |
1 |
- |
1.5 |
V |
|
Output low voltage (IOL = 100 μA) |
VOL |
-0.3 |
- |
0.2 |
V |
|
Output high current |
IOH |
- |
- |
-4 |
mA |
|
Output low current |
IOL |
+4 |
- |
- |
mA |
|
Input capacitance |
Ci |
- |
- |
10 |
pF |
Mechanical Specifications
The mechanical dimensions of the 100G coherent optical module . Max. dimensions (L × W × H): 107.5 mm × 41 .5 mm × 14.8 mm
Operating Environment
|
Parameter |
Min. |
Max. |
Unit |
|
Storage temperature |
-40 |
85 |
?C |
|
Operating case temperature |
0 |
70 |
?C |
|
Relative humidity, operating(non-condensing) |
5 |
85 |
% |
|
Relative humidity, operating (short term < 96 hrs,non-condensing) |
5 |
95 |
% |
|
ESD sensitivity (HBM) |
High-speed pins: 1000 Other pins: 2000 |
V |
Model
|
Model |
Description |
|
FTC2-2H-DCO-BIDI |
100G Coherent Optical Module |
乐天堂 | F-tone Networks
企业邮箱：sales@f-tone.com
企业网站：www.f-tone.com
企业网站：www.sfpgmk.com
企业电话：028-85255257
注：本产品有天下产化型号可选
本产品为CFP2光 ？，仅展示部分参数，若有需要，请联系乐天堂。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
100G/200G CFP DCO
100G/200G CFP DCO
F-tone Networks CFP DCO product family is designed based on dual polarization quadrature phase shift keying (DP-QPSK) or dual polarization quadrature amplitude modulation (DP-16QAM), supporting extended C-band, polarization diversity coherent detection and advanced electronic link equalization.
100GBASE-LR4 and OTN Multirate 10km CFP4 Optical Transceiver
100GBASE-LR4 and OTN Multirate 10km CFP4 Optical Transceiver
100G CFP4 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm CAUI-4, OTU4 4I1-9D1F specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39) and OIF CEI-28G-VSR.
100GBASE-LR4 10km Gen2 CFP2 Optical Transceiver
100GBASE-LR4 10km Gen2 CFP2 Optical Transceiver
100G CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4 specifications. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and Application Note AN-2118.
QSFP-DD EDFA
QSFP-DD EDFA
乐天堂自主研爆发产QSFP-DD EDFA光 ？，已海量交付给工厂自动化、电力、能源、太阳能、风电、水电、火电、核电、国防、军工、航空、航天、武器、舰船、雷达、电子、核工业、军事、铁路、医疗、交通、通讯、电信、政府、信创、国防科技工业系统内大专院校及科研院所
400ZR QSFP-DD
400ZR QSFP-DD
乐天堂自主研爆发产400ZR QSFP-DD光 ？，已海量交付给工厂自动化、电力、能源、太阳能、风电、水电、火电、核电、国防、军工、航空、航天、武器、舰船、雷达、电子、核工业、军事、铁路、医疗、交通、通讯、电信、政府、信创、国防科技工业系统内大专院校及科研院所
FFBR-1521Z_FFBR-2521Z简介
FFBR-1521Z_FFBR-2521Z简介
产品先容
FFBR-1521Z/2521Z系列光纤收发器件，可配合650nm塑料光纤使用，为工业、发电、医疗、交通和游戏应用等领域提供高性能低本钱的光纤通讯链路，事情温度抵达了95℃。