标准光 ？
100G-QSFP28光 ？槿盗
Specifications
- 产品型号: 100G-QSFP28光 ？槿盗
- 兼容品牌: 全系列
- 封装类型: QSFP28
- 传输速率: 4x25.78125 Gbps
- 传输距离: 100G-QSFP28光 ？槿盗
- 发射波长: 100G-QSFP28光 ？槿盗
- 吸收波长: 100G-QSFP28光 ？槿盗
- 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 吸收迅速度: 100G-QSFP28光 ？槿盗
- 吸收迅速度: 100G-QSFP28光 ？槿盗
Description
100G-QSFP28光 ？槿盗
Features
Hot Pluggable
QSFP+ MSA Compliant
Single 3.3V Power Supply
Maximum Link Length of 100m on OM3 MMF for SR4, 10km on SMF for LR4,30km on SMF for 30KM
Low Power Consumption
MPO Receptacles
Applications
40G/100G Gigabit Ethernet
Data Center Networking
-Converged Enhanced Ethernet Data Centers
-Data Center Bridging
Networked Storage Systems
未来5年，全球数据中心流量预计将增添至现在的3倍，整个通讯行业也急需将网络从10G 升级到40G~100G 甚至400G。切合 IEEE 802.3bm 标准的100G QSFP28和CFP4 ？榻淼目焖僭鎏硖峁┣坑辛Φ闹С。
F-tone Networks的100G QSFP28/CFP4产品系列包括：
100G QSFP28 AOC，P/N: QSFP28-AOC-XXX，在OM3多模光纤上最长传输距离为100m
100G QSFP28 SR4，P/N: QSFP28-SR4，在OM3多模光纤上最长传输距离为100m
100G QSFP28 LR4，P/N: QSFP28-LR4，在单模光纤上最长传输距离为10km
100G QSFP28 PSM4，P/N: QSFP28-PSM4，在单模光纤上最长传输距离为2km
100G QSFP28 ER4，P/N: QSFP28-ER4，在单模光纤上最长传输距离为30km
100G CFP4 SR4，P/N: CFP4-SR4，在OM3多模光纤上最长传输距离为100m
100G CFP4 LR4，P/N: CFP4-LR4，在单模光纤上最长传输距离为10km
100G CFP4 ER4，P/N: CFP4-ER4，在单模光纤上最长传输距离为30km
别的，F-tone Networks还将于2015年第二季度推出25G SFP28 AOC、SR 和 LR Lite 产品。
SFP28-AOC-XX :25G SFP28 AOC
SFP28-SR :25G SFP28 SR
SFP28-LR :25G SFP28 LR
SFP28-ER :25G SFP28 ER
F-tone Networks体现：“继 QSFP+ 在40G 网络中大规模安排及应用后，QSFP28将成为100G 数据中心网络安排的首选封装方法。F-tone Networks将继续坚持其在40G 产品领域的高性价比领先优势，并推出同类产品中最精彩的100G 解决计划。F-tone Networks的 QSFP28设计源于唯一无二的低本钱光学设计封装平台，该平台的光学耦合效率属业内最高。在先进制造工艺的支持下，F-tone Networks能以极具本钱效益的方法，大规模生产细密的高端光通讯 ？。F-tone Networks的客户也将充分享受到新一代100G QSFP28和CFP4手艺所创立重大价值。”
现在，F-tone Networks的 QSFP28和 CFP4产品2015年最先批量生产。有关详情，请联系您外地的F-tone Networks销售代表。
Related Products
QSFP-40G-SR4
- 4 independent full-duplex channels
- Up to 11.2Gbps data rate per channel
- MTP/MPO optical connector
- QSFP+ MSA compliant
- Digital diagnostic capabilities
- Capable of over 100m transmission on OM3 multi-mode ribbon fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- XLPPI electric interface (with 1.5W Max power)
- RoHS-6 compliant
QSFP-40G-LR4
- Compliant with 40G Ethernet IEEE802.3ba and
- 40GBASE-LR4 Standard
- QSFP+ MSA compliant
- Compliant with QDR/DDR Infiniband data rates
- Up to 11.2Gbps data rate per wavelength
- 4 CWDM lanes MUX/DEMUX design
- Up to 10km transmission
- Operating case temperature: 0~70C
- Maximum 3.5W operation power
- RoHS compliant
QSFP-56G-SR4
- Four-channel full-duplex transceiver modules
- Transmission data rate up to 14.025Gbit/s per channel
- 4 channels 850nm VCSEL array
- 4 channels PIN photo detector array
- Low power consumption <1.5W
- Housing isolated from connector ground
- Operating case temperature 0°C to +70°C
- 3.3V power supply voltage
- RoHS 6 compliant
- Hot Pluggable QSFP form factor
- Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
- Single MPO connector receptacle
- Built-in digital diagnostic function
QSFP+ Active Optical Cable
QSFP/QSFP+ Passive Electrical Loopback FTCQ-XLB is used for testing QSFP/QSFP+ transceiver ports in board level test. The electrical loopback provides a cost effective low loss method for QSFP/QSFP+ port testing. The FTCQ-XLB is packaged in a standard MSA housing compatible with all QSFP/QSFP+ ports.
QSFP28-100GBASE-LR4
基于IEEE-100GBASE-LR4规范，此产品典范功耗只有3.5W，比目今业界最好的100G CFP4 ？楣牡40%。它接纳最先进的100G传输手艺为数据中心提供机架交流机和焦点网之间的毗连，比40G QSFP计划提高了150%的面板带宽密度。相比于目今只支持12个 ？/单板的100G CFP2，QSFP28可以支持多达48个 ？/单板。100G LR4 QSFP28为现在超大型数据中心一直增添传输距离的需求提供了理想解决计划，并将引领单模光纤在数据中心的使用。
40GBASE-LR4 QSFP+ 1310nm Transceiver
F-tone 40GBASE-LR4 QSFP Module supports link lengths of up to 10km over a standard pair of G.652 single-mode fiber with duplex LC connectors. The 40Gbps QSFP+ transceiver is well suited for Infiniband and 40GBASE-LR4 applications. It combines the higher density attractions of parallel modules with some of the key advantages normally associated with SFP+ based modules.