标准光 ？
EPON-SFP-OLT光 ？
Specifications
- 产品型号: EPON-OLT-SFP
- 兼容品牌: 全系列
- 封装类型: SFP
- 传输速率: 1.25Gb/s
- 传输距离: 20KM
- 发射波长: 1490nm
- 吸收波长: 1310nm
- 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 吸收迅速度: 20KM
- 吸收迅速度: 20KM
Description
EPON OLT端光 ？榻幽蒘FP封装，该 ？榍泻螴EE802.ah EPON中的标准和要求。知足中国电信要求PX20+/PX20++ 具有切合SFF-8472规范的DDM功效。切合1类激光器要求及国际清静标准IEC 60825。
切合IEEE802.3ah要求
知足电信要求PX20+/PX20++
具有切合SFF-8472规范的DDM功效
光纤接口是单纤SC/LC接口或者带尾纤
发射端1490nm长发光、1310nmDFP突发模式激光器
吸收1310nm、1490nm的PIN/APD激光器
切合ROSH6的标准
| EPON OLT 光 ？ | TYPE | PN | PACKAGE | LD/PD | Λ(NM) |
RATE | RANGE |
AOP |
SEN | TEMP |
|---|---|---|---|---|---|---|---|---|---|---|
 |
Bidi SC | FTCS-OLE-20X | SFP | DFB/APD | 1490T/1310R | 1.25T/1.25R | PX20+ | +2~+7 | <-28 | C,I |
| FTCS-OLE-20XX | SFP | DFB/APD | 1490T/1310R | 1.25T/1.25R | PX20+ | +3.5~+7 | <-30 | C,I | ||
| FTCS-OLEP-20X | SFP | DFB/APD | 1490T/1310R | 1.25T/1.25R | PX20++ | +4.5~+8 | <-32 | C | ||
| FTCS-OLEP-20XX | SFP | DFB/APD | 1490T/1310R | 1.25T/1.25R | PX20++ | +5~+8 | <-33 | C |
FEATURES
- Single fiber bi-directional data links symmetric 1.25Gbps application
- 1490nm continuous-mode DFB laser transmitter and 1310nm burst-mode APD-TIA receiver
- Reset-less burst-mode receiver simply the system design
- +5~+8dBm high Average Launch Optical Power
- More than 25dB wide dynamic range
- 0 to 70°C operating temperature
- Single 3.3V power supply
- Digital diagnostic monitoring interface
- Digital burst RSSI function to monitor the input optical power level
- LVPECL compatible data input/output interface
- LVTTL transmitter disable control
- LVTTL transmitter laser fault alarm
- LVTTL receiver loss of signal indication
- Low EMI and excellent ESD protection
- Class I laser safety standard IEC-60825 compliant
- RoHS compliance for FTCS-OLEP-20X
APPLICATIONS
- Gigabit Ethernet Passive Optical Networks (GEPON) 30Km 1:32 application or 10/20Km 1:64 application
STANDARDS
- Complies with SFP Multi-Source Agreement (MSA) SFF-8074i
- Complies with IEEE 802.3ah?-2004
- Complies with FCC 47 CFR Part 15, Class B
- Complies with SFF-8472 Rev 9.5
- Complies with FDA 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Related Products
QSFP-40G-SR4
- 4 independent full-duplex channels
- Up to 11.2Gbps data rate per channel
- MTP/MPO optical connector
- QSFP+ MSA compliant
- Digital diagnostic capabilities
- Capable of over 100m transmission on OM3 multi-mode ribbon fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- XLPPI electric interface (with 1.5W Max power)
- RoHS-6 compliant
QSFP-40G-LR4
- Compliant with 40G Ethernet IEEE802.3ba and
- 40GBASE-LR4 Standard
- QSFP+ MSA compliant
- Compliant with QDR/DDR Infiniband data rates
- Up to 11.2Gbps data rate per wavelength
- 4 CWDM lanes MUX/DEMUX design
- Up to 10km transmission
- Operating case temperature: 0~70C
- Maximum 3.5W operation power
- RoHS compliant
CFP2-100G-SR10
CFP2-100G-SR10 CFP2, 850 nm, 3.3 V, 100GBASE-SR10 Compliant Pluggable Ethernet Optical Transceiver
CFP-100G-SR10
- Transmission data rate up to 11.2Gbit/s per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
- Up to 11.2 Gbps per channel bandwidth,
- OTU4 compatible
- 10 channels 850nm VCSEL array
- 10 channels PIN photo detector array
- OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0°C to +70°C
- 3.3V power supply
- RoHS 6 compliant(lead free)
CFP-40G-SR4
- Transmission data rate up to 11.2Gbit/s per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 40GBASE-SR4 links
- Up to 11.2 Gbps per channel bandwidth,
- OTU3 compatible
- 4 channels 850nm VCSEL array
- 4 channels PIN photo detector array
- OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0°C to +70°C
- 3.3V power supply
- RoHS 6 compliant（lead free）
CFP-40G-LR4
- Transmission data rate up to 11.2Gbps per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 40GBASE-LR4 links
- OTU3 compatible
- 1310nm Un-cooled CWDM DFB-DML ,Transmitter and optical MUX
- High Sensitivity PIN-TIA and optical DEMUX
- 1271, 1291, 1311, 1331nm CWDM grid in ITU-T G.694.2 up to 10km over a SMF
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0°C to +70°C
- 3.3V power supply
- RoHS 6 compliant（lead free