其它产品
FT 2000 nm Faraday Rotator Mirror
Description
FT 2000 nm Faraday Rotator Mirror
The Faraday Mirror is a passive device that provides 90 degree rotation regarding to the polarization state of the input light. The FM offers excellent performance including the lowest possible insertion loss and enviromental stability. It is used in EDFAs, fiber lasers and fiber instruments to mininize the polarization effect.
|
Specifications |
||
|
Parameter |
Unit |
Value |
|
Center Wavelength |
nm |
1920, 2000, 2070 |
|
Operating Wavelength Range |
nm |
±15 |
|
Typ. Insertion Loss |
dB |
0.6 |
|
Max. Insertion Loss |
dB |
0.9 |
|
Faraday Rotation Angle (Single Pass) |
degree |
45 |
|
Max. Rotation Angle Tolerance, λc, 23 ℃ |
degree |
|
|
Max.PDL |
dB |
0.1 |
|
Fiber Type |
SMF-28 fiber or SM 1950 fiber |
|
|
Max.Optical Power |
mW |
300 |
|
Max. Tensile Load |
N |
5 |
|
Operating Temperature |
℃ |
-5 to +70 |
|
Storage Temperature |
℃ |
-40 to +85 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
FT 10/20W 1030nm PM Isolator, CW or Pulsed, 1.0μm Fiber Laser
FT 10/20W 1030nm PM Isolator, CW or Pulsed, 1.0μm Fiber Laser
The 1030nm High Power Polarization Maintaining Isolator is characterized with low insertion loss, high isolation, high power handling, high return loss, and excellent environmental stability and reliability. It is ideal for fiber laser and instrumentation applications.
FT 10/20W 1030nm PM Isolator, CW or Pulsed, 1.0μm Fiber Laser
FT 10/20W 1030nm PM Isolator, CW or Pulsed, 1.0μm Fiber Laser
The 1030nm High Power Polarization Maintaining Isolator is characterized with low insertion loss, high isolation, high power handling, high return loss, and excellent environmental stability and reliability. It is ideal for fiber laser and instrumentation applications.
Mode Field Adaptor (MFA Series)
Mode Field Adaptor (MFA Series)
Features
High Signal Transfer Efficiency
Wide Wavelength Range
Minimum Degradation of Beam Quality
Custom Configurations Available
Application
Fiber Laser
Fiber Amplifiers
Description
Mode Field Matching
FT Singlemode Filter WDM (980/1064)
FT Singlemode Filter WDM (980/1064)
The Filter Wavelength Division Multiplexer is based on environmentally stable thin-film filter technology. The devices combine or separate light at different wavelength in a wide wavelength range. They offer very low insertion loss, low polarization dependence, high isolation and excellent environmental stability. High power handling capability can be achieved through unique pigtail processing and high quality ft coating. These components have been extensively used in EDFAs, Raman amplifiers, WDM networks and fiber optical instruments.
PM Filter WDM (980/1064)
PM Filter WDM (980/1064)
The Polarization Maintaining Filter Wavelength Division Multiplexer provides wavelength division multiplexing while maintaining signal polarization. The components are based on environmentally stable thin-film filter technology and are characterized with high extinction ratio, low insertion loss, and high return loss. They are ideal for high speed WDM network systems.
FT 1064nm Polarization Maintaining Isolator
FT 1064nm Polarization Maintaining Isolator
The Wavelength Division Multiplexers combine or separate light at different wavelengths. They offer very low insertion loss, low polarization dependence, high isolation and excellent environmental stability. These components have been extensively used in laser marking and fiber optics instrumentation.